Description

Type: Belt-drive manual turntable

Motor: DC servo with Active Speed Stabilization

Drive Method: Belt drive

Speeds: 33-1/3 RPM, 45 RPM

Turntable Platter: Die-cast aluminum

Wow and Flutter: < 0.15 % WRMS (33 RPM) at 3 kHz

Signal-to-Noise Ratio: > 60 dB

Output Level: PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec / LINE: 200 mV nominal at 1 kHz, 5 cm/sec

Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized

Power Supply Requirements: 100 to 240 V, 50/60 Hz, 0.5 A Max

Power Consumption: 1.8 W

Dimensions: 420 mm (16.54″) x 340 mm (13.39″) x 126 mm (4.96″) (W x D x H)

Weight: 5.5 kg (12 Ibs)

Accessories Included

• Dust cover

• Rubber mat

• Platter (with drive belt)

• Dust cover hinges

• Counterweight

• Headshell (AT-HS4 SV) with VM stereo cartridge (AT-VM95EBK)

• 45-RPM adapter

• RCA audio cable (Approx. 1.0m (3.3′)

• AC adapter (Approx. 1.5m (4.9′)

AC Adapter: 12 V, 1.0 A

Tonearm Type: Static balanced straight carbon tonearm

Effective Arm Length: 223.6 mm

Overhang: 18.6 mm

Tracking Error Angle: Less than 2.0°

Stylus Pressure Adjustment Range: 0 to 3.0 g

Applicable Cartridge Weight: (including headshell) 11.5 to 16.5 g

Replacement Stylus: AT-VMN95EBK (sold separately)

Replacement Headshell: AT-HS4 SV (sold separately)

Replacement Belt: AT-LPW50BT exclusive belt (sold separately)

Communication System: Bluetooth version 5.2

Frequency Band: 2.402 GHz to 2.480 GHz

Maximum RF Output: 15 mW EIRP

Maximum Communication Range: Line of sight – approx. 10 m (33′)

Modulation Method: GFSK, Pi/4DQPSK, 8DPSK

Compatible Bluetooth Profile: A2DP

Support Codec: SBC

Additional information