Audio-Technica AT-LPW50PB Fully Manual Belt-Drive Turntable

Description

Type: Belt-drive manual turntable

Motor: DC servo with Active Speed Stabilization

Drive Method: Belt drive

Speeds: 33-1/3 RPM, 45 RPM

Turntable Platter: Die-cast aluminum

Wow and Flutter: < 0.15% WRMS (33 RPM) at 3 kHz

Signal-to-Noise Ratio: >60dB

Output Level: Pre-amp “PHONO”: 4.0 mV nominal at 1 kHz, 5 cm/sec / Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec

Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized

Power Supply Requirements: 100-240 V, 50/60 Hz, 0.5 A Max.

Dimensions: With dustcover: 420.0 mm (16.54″) W x 356.0 mm (14.02″) D x 126.0 mm (4.96″) H / Without dustcover and hinges: 420.0 mm (16.54″) W x 356.0 mm (14.02″) D x 114.0 mm (4.49″) H

Weight: 5.56 kg (12.26 lbs.) without dust cover

Accessories Included: Dust cover, Platter, Turntable mat, Drive belt, Counterweight, AT-HS4 headshell, AT-VM95E stereo cartridge (black), 45-RPM adapter, RCA audio cable (approx. 1.0 m (3.3′)), AC adapter (approx. 1.5 m (4.9′)), Dust cover hinges

Notes

Tonearm type: Static balanced straight carbon tonearm

Effective arm length: 223.6 mm

Overhang: 18.6 mm

Tracking error angle: <2 degrees

Applicable cartridge weight: 12-17 g

Stylus pressure adjustment range: 0-3 g

Replacement Stylus: AT-VMN95E BK

Additional information