No products in the cart.
₨11,975 VAT Inc.
The Audio‑Technica PRO35 is a compact clip‑on condenser microphone designed to deliver detailed, reliable pickup for instruments — especially brass, woodwinds, percussion (toms, snare, etc.), sax/clarinet, or other high‑SPL sources. Its small, lightweight condenser capsule and cardioid pickup pattern allow you to clip it directly onto the instrument (via the included UniMount® clip), providing close, isolated capture of the instrument’s sound while minimizing bleed and unwanted ambient noise. The PRO35 handles high sound pressure levels cleanly — ideal for live stage performance, rehearsal, or recording — and includes a power module with an 80 Hz high‑pass (roll-off) filter to reduce low‑frequency rumble, mechanical noise, or handling / stage vibrations.
| Element Type | Fixed‑charge back plate, permanently polarized condenser |
| Polar Pattern | Cardioid |
| Frequency Response | 50 – 15,000 Hz |
| Low-Frequency Roll‑Off (High‑Pass Filter) | 80 Hz, 18 dB/octave (selectable via power module) |
| Open‑Circuit Sensitivity | –45 dB (5.6 mV / Pa at 1 kHz) |
| Output Impedance | 250 Ω nominal (Lo‑Z balanced output) |
| Maximum Input Sound Level (Max SPL) | 145 dB SPL, 1 kHz at 1 % T.H.D. |
| Dynamic Range (typical) | 115 dB (1 kHz at Max SPL) |
| Signal-to-Noise Ratio (A-weighted) | ≈ 64 dB (at 1 kHz, 1 Pa) |
| Phantom Power Requirement | 11 – 52 V DC, 2 mA typical |
| Included Accessories | AT8418 UniMount® instrument clip / mount, AT8538 power module with low‑cut filter, 6′ (≈ 1.8 m) permanently attached miniature cable (TA3F output), soft protective pouch. |
| Physical – Microphone Size / Cable | Mic capsule: 25.0 mm (0.98″) long, 10.2 mm (0.40″) diameter; 6′ (1.8 m) cable permanently attached to mic, ending in TA3F‑type connector. |
| Warranty Terms: | 1-year limited warranty covered by 101 Multimedia. |
| Brand | |
|---|---|
| Type of Microphones | XLR Microphone |
